湖南高速公路防撞墻鋼模具 隔離墩模具 建信廠家制造

建信模具

湖南高速公路防撞墻鋼模具 隔離墩模具 建信廠家制造
防撞墻模具需要在現場進行直接的使用才能夠生產出優質的防撞墻，目前來說防撞墻

對于公路的防護還有維持交通秩序的效果非常良好，通常像防撞墻或者是隔離墩都是

使用了水泥與混凝土加工制作，這樣能夠保證好防撞墻的硬度，也能夠讓防撞墻承受

住車輛撞擊上去的沖擊力度。湖南高速公路防撞墻鋼模具 隔離墩模具 建信廠家制造

在進行生產的時候防撞墻模板需要車輛運送至施工現場，并且在現場附近設立一些

防護的設施，也要做好防水處理不能夠讓電器接觸到水源。組裝模板的時候需要先確

定好施工范圍以及準確的施工位置，并將直板與彎板固定在兩側，兩塊模板直接的具

體就是生產出來的防撞墻墻體的厚度，需要按照不同的工程要求進行變動，而墻體的

厚度是需要由頂部的拉桿進行調節的，而拉桿也能夠作為模板的支撐。防撞墻模板是

需要按照公路的建設方向沿路進行施工處理，因為模板是只有兩片式的結構，所以使

用的時候需要在兩端使用工具進行堵塞，只有這樣在澆筑上泥漿后才能夠讓防撞墻順

利的成型。

Introduction of steel mould for Expressway anti-collision wall

The anti-

collision wall mold needs to be directly used on site to produce high-

quality anti-collision wall. At present, the anti-collision wall has a

very good effect on highway protection and maintaining traffic order.

Usually, the anti-collision wall or isolation pier are processed and made

of cement and concrete, which can ensure the hardness of the anti-

collision wall, It can also make the anti-collision wall withstand the

impact of vehicle impact. During production, the anti-collision wall

formwork needs to be transported to the construction site by vehicles, and

some protective facilities shall be set near the site. Waterproof

treatment shall also be done to prevent electrical appliances from

contacting the water source. When assembling the formwork, the

construction scope and accurate construction position shall be determined

first, and the straight plate and bending plate shall be fixed on both

sides. The direct concrete of the two formwork is the thickness of the

produced anti-collision wall, which needs to be changed according to

different engineering requirements. The thickness of the wall needs to be

adjusted by the pull rod at the top, and the pull rod can also be used as

the support of the formwork. The anti-collision wall formwork needs to be

constructed along the road according to the construction direction of the

road. Because the formwork is only a two-piece structure, tools need to be

used at both ends for blocking. Only in this way can the anti-collision

wall be formed smoothly after pouring mud.