混凝土化糞池模具 化糞池鋼模具的注意事項-建信廠家

建信模具

混凝土化糞池模具用于制作像獨居戶、學校、旅游景點等地方的化糞池，要想制作一個質量合格用使

用時間長久的混凝土化糞池模具需要注意以下幾點1.根據客戶需求提供的設計師圖紙制作出相對應尺

寸的模具，然后使用模具制做混凝土化糞池，模具有塑料模具有鋼模具，很多工程喜歡選取鋼模具，

因為鋼模具的使用時間長久、承受力大堅固，建議使用鋼板因為比起普通鋼板鋼板使用的時間長久，

2.施工時為了讓混凝土化糞池模具制作的化糞池外表美觀度增加，在注入混凝土震動完之后需要施工

人員用刮板把它的表面抹平，然后建議涂抹上油漆，這樣讓化糞池的使用時間延長不會損壞，起到一

個保護化糞池的作用，3.等混凝土完全凝固后，脫完模需要對模具進行及時的清洗，如果清水清洗不

干凈的話，要及時使用稀釋后的草酸對模具進行清洗，然后用刷子把表面殘留的混凝土殘留物刷干凈

，用專門擦模具的抹布把模具表面的水分擦干凈，避免出現生銹的現象，這樣即方便模具下次使用，

又能使模具的使用壽命延長。

The concrete septic tank mold is used to make septic tanks in places such as single

households, schools and tourist attractions. In order to make a concrete septic tank mold

with qualified quality and long service life, we need to pay attention to the following

points 1 According to the designer's drawings provided by the customer's needs, the molds

with corresponding dimensions are made, and then the molds are used to make the concrete

septic tank. The molds include plastic molds and steel molds. Many projects like to

choose steel molds because the steel molds have long service time and strong bearing

capacity. It is recommended to use steel plates because they are used for a long time

compared with ordinary steel plates. 2 During construction, in order to increase the

appearance of the septic tank made of the concrete septic tank mold, after the concrete

is injected and vibrated, the construction personnel need to smooth its surface with a

scraper, and then it is recommended to apply paint, so as to prolong the service time of

the septic tank without damage and protect the septic tank. 3 After the concrete is

completely solidified, the mold needs to be cleaned in time after removing the mold. If

the clean water is not clean, the mold should be cleaned with diluted oxalic acid in

time, then the residual concrete residue on the surface should be brushed with a brush,

and the water on the mold surface should be wiped with a special rag to avoid rust, This

not only facilitates the next use of the die, but also prolongs the service life of the

die.