高速標志樁鋼模具，標志樁塑料模具-建信模具

建信模具

標志樁模具分為標志樁鋼模具和標志樁塑料模具，兩者在材料上的不同也決定了兩者的價格不同。從脫模速度來說，標志樁鋼模具的速度要遠遠快于塑料模具，從這一點上，水泥制品的產量就會提高，尤其是在夏天溫度較高的季節，水泥樁的產量就會相對冬天生產提高3-5倍，如果是非常緊急的工程采用標志樁鋼模具生產就不言而喻了。由于鋼模具漏水效果比較好，在攪拌混凝土的時候也不需要放太多的水，這樣一來，在很大程度上就提高了水泥件的干燥程度，成型速度快了，生產量就會提高很多。所以客戶在選擇的時候要從多方面考慮，不能只注重價格因素，選擇適合自己工程的模具產品才重要。

The mark pile mould is divided into mark pile steel mould and mark pile plastic mould. The difference in materials also determines the different prices of the two. In terms of demoulding speed, the speed of steel mold for sign pile is much faster than that of plastic mold. From this point, the output of cement products will be increased, especially in the season with high temperature in summer, the output of cement pile will be 3-5 times higher than that in winter. It is self-evident that steel mold for sign pile is used for very urgent projects. Due to the good water leakage effect of the steel mold, there is no need to put too much water when mixing the concrete. In this way, the drying degree of the cement parts is improved to a great extent, the molding speed is fast, and the production will be improved a lot. Therefore, customers should consider from many aspects when choosing, not only pay attention to price factors, but also choose mold products suitable for their own projects.